Proline Dvd1270

Voici un extrait du manuel du Proline Dvd1270 que vous pouvez télécharger gratuitement :

Check that the rating plate on the back of the equipment states 110-240V AC before you plug it for the first time.

If the mains lead gets damaged it must be replaced by the manufacturer, its service agent or similarly qualified person with an approved lead of the same type and rating to avoid an electrical hazard.

If you cut off the mains plug or fit a different type, destroy the old plug, as it is dangerous if inserted into a live power outlet.

If a fuse is fitted to the plug, remove the fuse before throwing the plug away.

Carefully follow the wiring instructions supplied with a new mains plug.

• • • • • Mains plug wiring for the UK • In a re-wirable plug the wires in the mains lead of this equipment must be connected as follows.

The wire coloured brown must be connected to the terminal that is marked with the letter L.

The wire coloured blue must be connected to the terminal that is marked with the letter N.

Do not connect anything to the earth terminal which is marked E, or.

• • • You must make sure the mains lead is firmly under the cord clamp.

Mains Symbols fuse UK standard (BS1363) plugs must have a 3 amp (BS1362 type) fuse fitted.

Replace the plug or have the power lead assembly replaced if the fuse cover is lost.

This equipment is double insulated and an earth connection is not required.

This mark is applied to show the equipment conforms to European safety and electromagnetic comp -atibility standards.

Dangerous voltage constituting a risk of electric shock is present inside this equipment.

There are important operating and maintenance instructions in the lite -rature accompanying this equipment.

TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE ANY COVER We have designed and made this product to meet European safety standards, but as with any electronic equipment you must take care to stay safe and get the best results.

D ow nloaded from w w w .vandenborre.be P.3 Use this product only for its intended purpose use as described in the operating instructions supplied separately.

DO NOT leave the product unattended while it is operating unless it is designed to do so.

DO NOT cover or block any openings on this product or push objects into ventilation slots or openings.

DO NOT store this product outdoors or expose to rain or moisture.

DO NOT use this product near water, for example near a kitchen sink, in a bathroom or near a swimming pool unless specified in the operating instructions.

DO NOT use aggressive cleaners when cleaning the product, use only mild, non-abrasive soaps or detergents applied with a damp cloth or soft duster.

DO NOT immerse cord or plug in water and keep cord away from heated surfaces.

DO NOT let the mains cord hang over edge of a table or counter.

Repairs must only be undertaken by a qualified service person.

If they are blocked during operation, the product may be overheated and damaged.

DO NOT place product near a hot, damp surface such as a gas or electric range, or dishwasher.

This product is intended for domestic use only, commercial or any other use may invalidate the warranty and might be dangerous.

This product should be serviced only by qualified service personnel.

Contact the nearest authorised service centre for examination, repair or adjustment.

Examine the product: Remove all packing material and examine the product for any damage.

Immediately notify the retail store where the product was purchased if the product is damaged.

You must ensure the mains lead cannot be walked on, crushed, chafed or cut.

Avoid harsh conditions such as wet or damp places, high humidity, strong vibration, extremely high or low temperatures, strong sunlight and places that are very dusty.

To save power, disconnect from the mains power when you are not using the product unless the function of the product requires a continuous power supply.

Don't continue to use this equipment if you have spilt liquids in it, if it is damaged in any way or if it does not work normally.

Pull the mains plug out of the wall socket during thunderstorms.

Ventilation Place the equipment on a hard flat surface away from direct sunlight and heat sources.

Don't obstruct the ventilation slots, including those underneath, with soft furnishings.

Overheating will shorten the life of the equipment and increase the risk of fire.

Cleaning Disconnect the mains supply and use only a lightly dampened soft cloth.

Do not use chemical solvents or strong detergents as these may damage the cosmetic finish.

Batteries (not included) Remove batteries when the remote control is not to be used a long time.

Batteries left in the remote control may cause damage through deterioration and corrosive leakage, invalidating the guarantee.

To protect the environment, please use local recycling facilities for battery disposal.

Important safety warnings To prevent electric shock, do not remove any cover.

If anything goes wrong, don't try and fix it yourself, get a qualified service agent to look at the product.

Do not expose this equipment to dripping or splashing or place any objects filled with liquids, such as vases, on the equipment.

VIEDO OUT Connect composite video signal to input AV or PHONE sockets of TV or monitor to achieve high fidelity colour reproduction.

Power Cord Socket WARNING: The mains plug shall be the main disconnect device and should remain operable at all times.

FRONT PANEL AND REAR PANEL ILLUSTRATION Front panel 1 2 3 4 5 6 7 1.

Press to play the loaded disc, press again to pause current playback.

Next Press to switch the unit On or Standby when connected to AC power outlet.

Rear Panel 1 2 3 4 D ow nloaded from w w w .vandenborre.be P.5 STANDBY MUTE SUBTITLE ANGLE PROG AUDIO SETUP ARROW BUTTON TITLE N/P FAST BACKWARD FAST FORWARD REPEAT STEP SLOW NUMERIC BUTTONS GOTO DISPLAY RETURN ZOOM ENTER MENU PBC PLAY/PAUSE PREVIOUS NEXT STOP L/R VOLUME CONTROL CLEAR A-B OPEN/CLOSE REMOTE CONTROL Notes on Discs Handling Discs Do not touch the play side of the disc.

Hold the disc by the edges so that fingerprints do not get on the surface.

Do not expose the disc to direct sunlight or source of heat and never leave it in a parked car exposed to direct sunlight.

Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion.

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

Using the Remote Control Unless stated otherwise, the remote control can operate all the features of the DVD Player.

Always point the remote control directly at the remote sensor on the front of the DVD Player, not the TV.

Battery Installation Remove the battery compartment cover on the rear of the remote control.

Place two AAA batteries inside the battery compartment observing the polarity markings.

Do not mix old and new batteries or different types of batteries.

D ow nloaded from w w w .vandenborre.be P.6 Important: When replacing batteries, please take care to dispose of them in accordance with current regulation.

For this reason please put them in the right assigned place, in order to ensure they are recycled while respecting environment.

Region Code This DVD player is designed and manufactured for play of region “2” encoded DVD software.

Playable Discs DVD video Region number 2 DVD -R / +R DVD video DVD -RW / +RW DVD video CD-R / CD-RW Digital audio /JEPG format files JPEG/MPEG4 Each file of JPEG:under 1M Non-playable Discs DVD video Different region number DVD-ROM Files for PC application / Data files CD-ROM Files for PC application / Data files CD-MP3 Files under windows format DVD-RAM All format CONNECTIONS Turn off the power before connection.

Connect the supplied RCA cable to the TV and DVD player as shown below.

D ow nloaded from w w w .vandenborre.be P.7 OPERATION Functions Buttons on the Front Panel BASIC OPERATION These buttons function the same as the corresponding buttons on the remote control.

Press POWER on the TV and switch it to the correct video-in source.

Refer to your TV user's manual to select the correct input on your TV.

Press STANDBY on the front panel of your DVD player to turn the unit on.

Press to open the disc tray and insert the disc with its label facing up.

N/P Choose one of the following video output modes by pressing N/P.

Each time you press the button, the video output system changes as below: NOTE: When video output mode is not proper for the connection, no picture or sound may occur.

MENU During DVD playback, press MENU to return to the root menu.

PBC During VCD playback, press PBC to turn the unit on or off.

RETURN During VCD playback (PCB is on), press RETURN to display the root menu.

Multi Speed Fast Motion Playback Repeatedly press to fast forward play.

Fast Forward Playback has four speeds: x 2, x 4, x 8 and x 20.

Fast Reverse Playback has four speeds: x 2, x 4, x 8 and x 20.

Multi Speed Slow Motion Playback Repeatedly press SLOW to enter Slow Motion Playback mode.

Slow Motion Playback has six speeds: 1/2, 1/3, 1/4, 1/5, 1/6 and 1/7.

Press AUDIO to change the audio language you want when you play multi-language DVD discs.

Changing the Audio Language L/R (Compatible with VCD discs) Skipping Tracks D ow nloaded from w w w .vandenborre.be P.8 To skip forward to the beginning of the next title / chapter / track on a disc, press.

To skip backward to the beginning of the preceding title / chapter / track on a disc, press.

Repeat a Specific Segment on the Disc that You Define During playback, press REPEAT to play a title, chapter or disc.

Repeatedly press or numeric buttons to select the desired title.

Subtitles Press SUBTITLE repeatedly to change the subtitle language or turn it off.

Program Play The Program Playback option allows you to enter the order in which you want chapters or tracks to play to a maximum of 16.

Press numeric buttons to enter Track or Title then the chapter.

NOTES: To clear the programmed order, use to highlight the “CLEAR” item then press ENTER.

To modify the programmed order, use to highlight the item to modify and enter the new chapter / track you want to program.

GOTO During VCD/CD playback, press GOTO to display as below: Use to select the desired track/time then enter numeric button to input track/time you want to play.

During DVD playback, press GOTO to display as below: REPEAT : [CHAPTER] REPEAT : [TITLE] - DVD - - VCD- REPEAT : [ALL] REPEAT : [OFF] REPEAT : [1] REPEAT : [ALL] REPEAT : [OFF] D ow nloaded from w w w .vandenborre.be P.9 Use to select the desired track/time then enter numeric button to input track/time you want to play.

After set is finished, press ENTER to start playing the selected track/time of title or chapter.

Changing the Camera Angle Repeatedly press ANGLE to change the viewing angle.

NOTE: Multi-angle function is limited to a DVD disc supporting multi-angle information.

Zoom In on the Image The Zoom Function allows you to enlarge the video image.

Repeat a Specific Segment on the Disc that You Define During the normal or fast motion playback, Press A-B once and “REPEAT A” will appear on the screen.

Volume control You can press VOL+/- on the remote control or the TV set or the amplifier to control the sound level.

D ow nloaded from w w w .vandenborre.be EN-10 SYSTEM SETUP General Steps of Setup Menu Press SETUP , the main setup menu appears.

Press to highlight the icon of the desired page, then press to activate that page.

System Setup The system setup options are listed below: TV SYSTEM According to the Colour System of the TV, you can choose the TV System.

AU TO: Choose this settings if your DVD player is connected to a multi-system TV.

NTSC: Choose this settings if your DVD player is connected to a NTSC TV.

PAL: Choose this settings if your DVD player is connected to a PAL TV.

TV TYPE 4: 3 PAN SCAN: Choosing this setting if your DVD player is connected to a normal ratio TV.

(This might mean that the left and right edges of the picture wouldn’t be seen.) 4: 3 LET.

BOX: Choosing this setting if your DVD player is connected to a normal ratio T V.

You’ll see the movies in their original aspect ratio (height-to-width ratio).

You’ll see the entire frame of 16: 9 (Wide Screen): Choose this setting if your DVD player is connected to a wide screen TV don’t have a wide screen TV, the images on the screen may Notes: The image display ratio is related to the recorded disc format.

Some disc can not display images in the aspect ratio you choose.

If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on screen.

You must adjust the screen setting depending on the PASSWORD The password option is initialised locked, and you cannot set the ratings limit or change the password.

In order for the Ratings feature to work, the password mode must be turned on.

If you helps you control the types of DVDs that your family watches.

The rating options are: 1 KID SAFE,2 G,3 PG,4 PG13,5 PG-R,6 R,7 NC-17,8 ADULT.

Notes: If the password option is locked, you cannot set the ratings limit; the rating limit doe not work when the password option is unlocked.

DEFAULT Choose this option to return all the setup options to default settings.

Language Setup The language setup options are listed below: Highlight the OSD LANGUAGE option, and press to choose the OSD language you prefer.

Highlight the AUDIO LANG option, and press to choose the audio language you prefer.

If the disc you are playing has that language available, it will output audio in Highlight the SUBTITLE LANG option, and press to choose the subtitle language you prefer.

If the disc you are playing has that language available, it will display Highlight the MENU LANG option, and press to choose the menu language you prefer.

If the disc you are playing has that language available, it will display menu in appear distorted due to vertical compression.

the left and right side of the type of the television you have.

the movie, but it will take up a smaller portion of the screen want to set the ratings limit, you will need to enter the default password which is 8888 then press RATING The Rating feature is a rating limit system, like movie ratings.

D ow nloaded from w w w .vandenborre.be P.11 Audio Setup The audio setup options are listed below: SPECIFICATIONS DOWNMIX Use to move the highlight and adjust the option.

LT / RT: Choose this setting, it will sound like in a movie theatre if the original movie the disc was recorded STEREO: A standard stereo signal will be output.

VSS: Choose this setting, when a disc recorded in the 5.1-channel sound format is playing, the fictitious surround soundtracks effect will be heard from the main soundtrack.

OP MODE LINE OUT: It will be more suitable to choose this setting for playing in the night time, for the output volume is low.

RF REMOD: It will be more suitable to choose this setting for playing in the day time, for the output volume is high.

DYNAMIC RANGE When LINE OUT is selected, choose this setting to adjust the line out ratio and get different effect.

If adjusting to FULL, the audio signal peak value will be the minimum; while adjusting to OFF, maximum.

DUAL MONO Choose this option to setup the L and R mono output mode.

There are four modes in this option: STEREO, MONO L, MONO R, and MIX MONO.

Video Setup The video setup options are listed below: BRIGHTNESS\CONTRAST\HUE\SATURATION\SHARPNESS Use to move the highlight and adjust the options.