LG 47LEX8

Voici un extrait du manuel du LG 47LEX8 que vous pouvez télécharger gratuitement :

OWNER’S MANUAL LED LCD TV / PLASMA TV Please read this manual carefully before operating your set and retain it for future reference.

P/NO : SAC34134205 (1004-REV02) www.LG 47LEX8.com The model and serial number of the TV is located on the back and one side of the TV.

MODEL SERIAL LED LCD TV MODELS 47LX9500 55LX9500 47LEX8 55LEX8 60LEX9 72LEX9 PLASMA TV MODELS 50PK950 60PK950 2 WARNING / CAUTION The lightning flash with arrowhead symbol, within an equilateral trian- gle, is intended to alert the user to the presence of uninsulated “dan- gerous voltage” within the product’s enclo- sure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equi- lateral triangle is intended to alert the user to the presence of important oper- ating and maintenance (servicing) instruc- tions in the literature accompanying the appliance.

NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.).

The code provides guide- lines for proper grounding and, in particular, speci- fies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture.

FCC Notice Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable pro- tection against harmful interference in a residen- tial installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour- aged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna.

- Increase the separation between the equip- ment and receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is con- nected.

- Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two condi- tions: (1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation (of the device).

Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION Do not attempt to modify this product in any way without written authorization from LG 47LEX8 Electronics.

Unauthorized modification could void the user’s authority to operate this product.

4 Do not install near any heat sources such as radiators, heat registers, stoves, or other appa- ratus (including amplifiers) that produce heat.

5 Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an elec- trician for replacement of the obsolete outlet.

6 Protect the power cord from being walked on or pinched particularly at plugs, conve- nience receptacles, and the point where they exit from the apparatus.

7 Only use attachments/accessories speci- fied by the manufacturer.

8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

9 Unplug this apparatus during lighting storms or when unused for long periods of time.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is dam- aged, liquid has been spilled or objects have fallen into the apparatus, the appara- tus has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT SAFETY INSTRUCTIONS 4 SAFETY INSTRUCTIONS 11 Never touch this apparatus or antenna during a thunder or lighting storm.

12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV.

13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.

14 CAUTION concerning the Power Cord: It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appli- ance and has no additional outlets or branch circuits.

Check the specification page of this owner's manual to be certain.

Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock.

Overloaded wall outlets, loose or damaged wall outlets, exten- sion cords, frayed power cords, or damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric shock or fire.

Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discon- tinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon.

Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

15 WARNING - To reduce the risk of fire or elec- trical shock, do not expose this product to rain, moisture or other liquids.

Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning.

16 Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc.

17 GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock (i.e.

a TV with a three-prong grounded AC plug must be connected to a three-prong ground- ed AC outlet).

If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Power Supply Short-circuit Breaker 18 DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device.

19 As long as this unit is connected to the AC wall outlet, it is not disconnected from AC power even if you turn off the power switch on the unit.

5 20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below.

An outdoor antenna sys- tem should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.

Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code (NEC) in the U.S.A.

provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding elec- trodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Antenna Lead in Wire Antenna Discharge Unit (NEC Section 810-20) Grounding Conductor (NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250, Part H) Ground Clamp Electric Service Equipment NEC: National Electrical Code 21 Cleaning When cleaning, unplug the power cord and rub gently with a soft cloth to prevent scratching.

Do not spray water or other liquids directly on the TV as electric shock may occur.

Do not clean with chemicals such as alcohol, thinners or benzene.

22 Moving Make sure the product is turned off, unplugged and all cables have been removed.

Do not press against or put stress on the front panel of the TV.

23 Ventilation Install your TV where there is proper ventila- tion.

Do not cover the product with cloth or other materials (e.g.) plastic while plugged in.

When watching the TV for a long period, the ventilation openings may become hot.

25 If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center.

26 Do not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it.

28 For LED LCD TV If the TV feels cold to the touch, there may be a small “flicker” when it is turned on.

Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.

However, they have no adverse effect on the monitor's performance.

Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.

This TV contains the detailed cali- brations necessary for professional certification by the Imaging Science Foundation.

The resulting ISF “day” and “night” modes will then be accessible by the user to experi- ence the best their LG 47LEX8 HDTV has to offer.

Sophisticated and detailed calibra- tions can be made through the ISFccc mode.

Please contact your local dealer to inquire about an ISF certified tech- nician.

THX (Thomlinson Holman’s Experiment) is an audio and video certification standard established by George Lucas and Thomlinson.

A THX certified display guarantees screen quality that exceeds the dis- play standard specification in both hardware and software.

A unique invisible speaker system tuned by renowned audio expert, Mr.

Speakers are embedded in strategic spots behind the front cabinet and use minute vibrations to turn the entire front bezel into the speaker system.

The result s a clean, polished look, and enhanced audio by increasing the “sweet spot”, giving a wider and richer sound field.

Unlike other sensors which can only sense brightness of ambient light, LG 47LEX8’s “Intelligent Sensor” uses 4,096 sensing steps to evaluate its surroundings.

Using a sophisticat- ed aLG 47LEX8orithm, the LG 47LEX8 processes picture quality elements including brightness, contrast, color, sharp- ness and white balance.

The result is a picture optimized for it’s sur- roundings, more pleasing to watch and which can also save up to 50% in power consumption.

High- resolution digital television broad- cast and playback system com- posed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio.

A subset of digital television, HDTV formats include 1080p, 1080i, and 720p resolutions.

“Dolby “and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trade- marks of HDMI Licensing LLC." Displays HDTV programs in full 1920 x 1080p resolution for a more detailed picture.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc.

This is an official DivX Certified device that plays DivX video.

Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON- DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content.

To generate the registration code, locate the DivX VOD section in the device setup menu.

Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

“DivX Certified to play DivX video up to HD 1080p, including premi- um content” “Pat.7,295,673;7,460,688;7,519,274” 9 IMPORTANT INFORMATION TO PREVENT “IMAGE BURN / BURN-IN” ON YOUR TV SCREEN ꔛ When a fixed image (e.g.

logos, screen menus, video game, and computer display) is displayed on the TV for an extended period, it can become permanently imprinted on the screen.

This phenomenon is known as “image burn” or “burn-in.” Image burn is not covered under the man- ufacturer’s warranty.

ꔛ In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

ꔛ Image burn can also occur on the letter- boxed areas of your TV if you use the 4:3 aspect ratio setting for an extended period.

View videos and photos and listen to music on your TV through USB 2.0 (‘videos’ dependent on model).

It allows the viewer to quickly switch between common settings.

Automatically enhances and ampli- fies the sound of human voice fre- quency range to help keep dia- logue audible when background noise swells.

PREPARATION PREPARATION 10 ACCESSORIES PREPARATION Ensure that the following accessories are included with your TV.

If an accessory is missing, please con- tact the dealer where you purchased the TV.

Option Extras * Wipe spots on the exterior only with the polishing cloth.

Excessive pressure may cause scratches or discoloration.Polishing Cloth Not included with all models Not included with all models 1.5V 1.5V 1,5Vcc 1,5Vcc D-sub 15 pin Cable When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to main- tain standards compliance.

1.5V 1.5V 1,5Vcc 1,5Vcc 1.5V 1.5V 1,5Vcc 1,5Vcc Owner’s Manual CD Manual, Nero MediaHome 4 Essentials CD Remote Control, Batteries (AAA) Motion Remote Control, Strap, Batteries (AA) Ferrite Core (Black) Ferrite Core (White) Close to the wall plug.

Ferrite core can be used to reduce the electromagnetic waves that may interfere with the TV.

Install the Ferrite core on the power cable close to the wall plug.

Ferrite core can be used to reduce the electromagnetic wave when connecting the LAN cable.

Place the ferrite core far from TV and wind the LAN cable in the ferrite core once.

1.5V 1.5V 11 PREPARATION OPTIONAL EXTRAS Optional extras can be changed or modified for quality improvement without any notification.

These devices only work with compatible LG 47LEX8 LED LCD TV and Plasma TV.

FRONT PANEL INFORMATION 50/60PK950 ENTER CHVOLMENUINPUT SPEAKER Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions ENTER CHVOLMENUINPUT Touch Button You can operate the button just by touching the button lightly with your finger.

ENTER CHVOLMENUINPUT CHANNEL (ꕌ,ꕍ) Buttons VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button POWER Button Power/Standby Indicator Illuminates red in standby mode.

13 PREPARATION 47/55LX9500 SPEAKER Emitter It is the part equipped with the emitter exchanging sig- nal with 3D glasses.

Please be careful not to block the screen with objects or people while watching a 3D Video.

Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions CH VOL ENTER INPUT MENU CHANNEL (ꕍ,ꕌ) Buttons VOLUME (-, +) Buttons ENTER Button INPUT Button MENU Button POWER Button Power/Standby Indicator (Can be adjusted using the Power Indicator in the OPTION menu.►p.142) PREPARATION PREPARATION 14 ꔛ Image shown may differ from your TV.

47/55LEX8, 60/72LEX9 VOL ENTERCH MENU INPUT SPEAKER Power/Standby Indicator (Can be adjusted using the Power Indicator in the OPTION menu.►p.142) Remote Control Sensor VOL ENTER MENU INPUT VOL ENTERCH MENU INPUT CHANNEL (ꕍ,ꕌ) Buttons VOLUME (-, +) Buttons ENTER Button MENU Button INPUT Button POWER Button Touch Button You can operate the button just by touching the button lightly with your finger.

Intelligent Sensor Adjusts picture according to the surrounding conditions Emitter 15 PREPARATION BACK PANEL INFORMATION ꔛ Image shown may differ from your TV.

*A 10 mm (0.39 inches) 17 PREPARATION 1 LAN Network connection for Netflix, Yahoo! TV Widgets, etc (for USA).

Also used for video, photo and music files on a local network.

Accepts DVI video using an adapter or HDMI to DVI cable (not included).

AUDIO IN (RGB/DVI) 0.32 cm (1/8 inch) headphone jack for analog PC audio input.

4 RS-232C IN (CONTROL & SERVICE) or SERVICE ONLY Used by third party devices.

5 OPTICAL DIGITAL AUDIO OUT Digital optical audio output for use with amps and home theater systems.

7 ANTENNA/CABLE IN Connect over-the-air or cable signals to this jack.

Uses a red, green, and blue cable for video & red and white for audio.

9 WIRELESS CONTROL Connect the Wireless Ready Dongle to the TV to control the external input devices con- nected to Media Box wirelessly.

10 USB INPUT Used for viewing photos, watching movies and listening to MP3s.

11 HEADPHONE 0.32 cm (1/8 inch) headphone jack Impedance 16 Ω , Maximum audio out 15 mW 12 Power Cord or Socket For operation with AC power.

PREPARATION PREPARATION 18 STAND INSTRUCTIONS (For 50/60PK950) ꔛ Image shown may differ from your TV.

INSTALLATION (For 50PK950) ! ? ! ? NOTE ► When assembling the desk type stand, make sure the screws are fully tightened (If not tightened fully, the TV can tilt forward after the product installation).

1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2 Assemble the parts of the STAND BODY with the STAND BASE of the TV.

3 Assemble the parts of the CABLE MANAGEMENT CLIP with the STAND BODY.

STAND BASE STAND BODY STAND BODYCABLE MANAGEMENT CLIP M4 x 14 19 PREPARATION DETACHMENT PROTECTION COVER After removing the stand, install the included PROTECTION COVER over the hole for the stand.

Press the PROTECTION COVER into the TV until you hear it click.

When installing the wall mounting bracket, use the PROTECTION COVER.

1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

50PK950 60PK950 M4 x 30M4 x 28 PREPARATION PREPARATION 20 STAND INSTRUCTIONS (For 47/55LX9500, 47/55LEX8) ꔛ Image shown may differ from your TV.