Innostream INNO P10

Voici un extrait du manuel du Innostream INNO P10 que vous pouvez télécharger gratuitement :

INNO-P10 User’s Manual Unpacking Your package contains the following items.

Handset Battery EarphoneUSB Cable User’s manual HandStrap Travel adapter(A type or B type) A type B type Battery ChargerBattery Car Charger PC Sync CD Option MMC Card CONTENTS 2 1.

Before You Start 6 1.1 PhPhone Layout and Icons The following illustration shows the main elements of your phone.

Shows the received signal strength.

The larger the number of bars, the better the signal strength.

Appears when the phone is out of your home network area and the phone is registered to the network other than its home service (i.e.

when travelling in other countries with GSM service) Number and Alpha Keys Micro Ear Phone Jack Main Display Screen Navigation Keys Soft Key (left) Soft key (Right) Side Key External Socket END KeySEND Key User’s Manual 1.

If your phone is in the quick silence mode, all audible key tones are muted and all audible alerts are changed to vibrator alert.

Appears when infrared port is active for receiving file and ready for using modem via infrared port.

Appears when an alarm is expired.

Indicates that your phone is under security code checking after power up.

Before You Start 8 Appears when you have messages waiting in voice mail.

Indicates that your phone is plugged in USB cable in case of Mass Storage.

Key Description Performs the functions indicated by the text in the bottom line of the display screen above those keys.

In the idle mode, launches the recent calls list.(Dialled, Missed and Received ) In the menu, selects menu function or stores information that you have entered (such as a name) in the phone or SIM memory.

By pressing and holding [ 1 ] in the idle mode, you can directly listen to the Voicemail.

Enters ‘+’(International Indicator) or ‘P’(Pause) when pressed and held.

(on the left side of phone) During a call, adjust the earpiece volume.

[VOL-UP] It switches between the quick silence mode and previous profile you have set on Profiles menu when pressed and held in the idle mode.

[VOL-DOWN] In the idle mode, displays the today’s date, day and time for short time.And in the idle mode, launch auto response for long time.

You can set the navi-keys([NAVI-LEFT] , [NAVI-RIGHT] , [NAVI- UP] , [NAVI-DOWN] ) using the Navi-Key Setting Menu or pressing [NAVI-Keys] for one seconds.

You first have to set the Navigation Keys, Because the default setting of Navi-Key Setting is nothing.

If It is not set and you press [NAVI-Keys] in the idle screen, Navi- Key Setting popup window will be launched.

[NAVI-CENTRE] In the editing mode, launches the editing mode selection menu.

1.2 Quick Silence ModeQuick Silence Mode You can switch the sound/alert mode of your phone by just pressing and holding the [VOLUME-UP] on the idle screen.

icon on the top of the main display screen or icon on the top of the display screen indicates that your phone is under the quick silence mode status.

If your phone is in the quick silence mode, all audible key tones are muted and all audible alerts are changed to vibrator alert.You can return to previous profile setting by pressing and holding the [VOLUME-UP] again.

1.3 Using the Navigation KeysUsing the Navigation Keys To use the navigation keys appropriately.

① [NAVI-LEFT] : Push the left side of the navigation key bar to left direction.

② [NAVI-RIGHT] :Push the right side of the navigation key bar to right direction.

③ [NAVI-UP] : Push the up side of the navigation key bar to up direction.

④ [NAVI-DOWN] : Push the down side of the navigation key bar to down direction.

Before You Start 10 1.44 Using the EarphoneUsing the Earphone If you insert the earphone to the jack on the left side of your phone, you can use it in the same way as your phone’s earpiece and microphone.

You can answer or end a call by pressing the hook button on the earphone.

When new waiting call is come whilst you are in a call, you can answer the waiting call by pressing the hook button on the earphone.

(The first call will be held automatically) You can make the last number dialled call in the idle screen by pressing the hook button on the earphone.

The last number dialled is launched by pressing the hook button, and then the call will be made by pressing the hook button again.

1.5 Display Screens in the Idle ModeDisplay Screens in the Idle Mode Icon Area Network Status or Event Area Broadcast and Digital Time Area Function Key Area The background image is displayed according to the setting of Wallpaper menu.

You can set the background image from Sample Image, Photo Album, Image File, Vis Storage, Camcoder Album menu.

Before You Start 11 Icon Area: 13 icons such as Signal Level, GPRS, SMS, Vibrator,Vibrator,Vibrator Alarm, Roaming, Battery Level, PUSH Massage,Voicemail, IRDA, GPRS Modem, Auto response,Voicemail, IRDA, GPRS Modem, Auto response, and NO- MMC Card are displayed indicating the phone status.

If the quick silence mode is enabled, icon will appear in the Vibrator icon’s place.

If there is an active GPRS connection, icon will appear in the GPRS icon’s place.

If Travel Charger is inserted, the Battery icon will be scrolled.

Network Status or Event Area: Network name registered is displayed.

If Network Name Display menu is set to Off, theOff, theOff network name is not displayed even though your phone is registered to any GSM or GPRS network.

If there is not any GSM or GPRS network near the location you are, No Service is displayed.

If you are in the coverage of a GSM or GPRS network but you are not allowed to be registered to the network, Emergency Only is displayed.Emergency Only is displayed.Emergency Only If an event is occurred, an adequate big event icon is displayed.

If Network Name Display menu is set to Off, the network name is not displayed even though your phone is registered to any GSM or GPRS network.

Note Broadcast and Digital Time Area: If you set to get the broadcast message from the network, you can see it on this area of the idle screen.

For details of how to activate and deactivate it, please see Broadcast menu in Section 9.

In this case, the User Selectable Area updates the received broadcast messages.

The digital time is displayed at the right bottom place in this area.

If Clock Display menu is set to Off, the digital time is not displayed.

The broadcast message service may not be available on all networks.

Note Function Key Area: The functions assigned to right soft key and left soft key are displayed.

If you press [ ], current date, day and time is displayed at this area for short time.

Getting Started 12 Please never detach the battery from your mobile whilst your phone is alive.

To turn off your phone, please press and hold down only until you see the power-off animation.

Note 2.1 How to attach the batteryHow to attach the battery 1.

Align the bottom of the battery down into the holes in the bottom of the phone.

Then sit the battery on the back of the aligned until it clicks into place.

2.2 How to remove the batteryHow to remove the battery Turn off your phone first.

Slightly lift the upper place of battery out of back of phone.

Getting Started 13 2.3 How to charge the batteryHow to charge the battery The first charging must be for at least 4 hours in order to achieve optimum performance when you buy this phone.

Normally your phone completes to charge the battery in two hour.

Your phone turns off by itself if the battery is not able to supply enough power.

The display may not visible for a few seconds in case that full discharged battery is used.

Plug your Travel Adaptor into the external socket at the bottom of your phone.

The percentage of charging will be indicated on the main display screen.

After complete charging, the percentage of charging disappears.

Even after complete charging, the phone automatically checks the battery status during the Travel Adaptor is inserted.

Once it detects that the battery level is below full status, it will automatically recharge the battery.

Plug your Travel Adaptor into the charger socket at the bottom of the Battery Charger.

Sit your battery into the holder of the Battery Charger properly sliding down.

The LED indicator of the Battery Charger indicate the charging status as follow.

• Green Colour : It indicates idle state or full-charged state.

• Red Colour : It indicates the battery is being charged.• Red Colour : It indicates the battery is being charged.• Red Colour 2.4 How to place the SIM cardHow to place the SIM card Ensure your phone is switched off and the charger is detached first before you start the following steps.

Getting Started 15 2.5 How to remove the SIM cardHow to remove the SIM card Ensure your phone is switched off and the charger is detached first before you start the following steps.

Slide the SIM card by pushing up the back of the card and remove it from the holder.

About the SIM card The SIM card is a computer chip containing information about your subscription, security, phonebook etc.

When you register as a subscriber with GSM or GPRS network operator, you are provided with the SIM card.

Always handle the SIM card with care and insert with the gold contacts face down.

Note 2.6 How to place the Memory CardHow to place the Memory Card Ensure your phone is switched off and the charger is detached first before you start the following steps.

Slide the Memory card into the slot and push left the Memory card holder to fix the Memory card.

Getting Started 16 2.7 How to remove the Memory CardHow to remove the Memory Card Ensure your phone is switched off and the charger is detached first before you start the following steps.

Remove the Memory Card from the slot after push right on the Memory Card holder.

About the Memory Card Your phone comes with a ready-to-use Memory card (Memory Card) You can use this Memory card to manage your files, applications and back-ups.

Always handle the Memory Card D with care and insert with the gold contacts face down.

Removing the card in the middle of an operation may damage the Memory card as well as the device, and data stored on the card may be corrupted.

Note 2.8 How to switch your phone On and OffHow to switch your phone On and Off Make sure that the battery is attached.

a) To switch your phone on, press and hold down [ ] until you hear the power-on melody.

If Enter PIN is prompted, enter your PIN and then press [Ok soft key].Ok soft key].Ok For more details, please see Security Codes in section 3.

Getting Started 17 If your PIN is entered invalidly three times in succession, your SIM card is blocked.

Note If Enter Lock Code is prompted, enter your Lock Code and then press [Ok soft key].

After the phone is turned on, the phone searches for a network.

b) To switch your phone off, press and hold down [ ] until you see the power-off animation.

2.9 How to using Mass storageHow to using Mass storage Make sure that the USB cable is inserted.

① Delete and correction of the folder in Data Storage are prohibited.

② When a phone is plugged in a USB cable, all function of a phone do not operate it.

④ In case of using a function of the USB mass storage at WIN 98 or WIN98 SE, you will be able to download the install files from our homepage(www.Innostream INNO P10.com) or near AS center.

Note In case of copying many files at a time, it imposes a heavy burden on a Phone.

Security Codes 18 The security codes are used to protect your phone and SIM card from other person’s use and control access to security and other options within the menus.

You can change the security codes (except SIM Lock Code, PUK Code, PUK2 Code).

For more details, please see the Security Setting menu in section 9.

3.1 PINPIN PIN is Personal Identification Number, used to safeguard your SIM card.

PIN code is composed of at least 4 to 8 digits, and usually provided with your SIM card.

If the PIN code is entered incorrectly more than three times in succession, PIN will be blocked and your SIM card will automatically lock-up and the Enter PUK screen will beEnter PUK screen will beEnter PUK prompted.

Once your SIM card is blocked, you must enter the unblock code (PUK) to use your phone again.

3.2 PUKPUK PUK is Personal Unblocking Key, used to unblock the blocked SIM card due to incorrectly entered PIN.

PUK code is composed of 8 digits, and usually provided with your SIM card.

If the PUK code is entered incorrectly ten times in succession, PUK will be blocked and your SIM card will be automatically lock-up and the SIM Blocked message will be displayed.

Once you see the message then you need to contact your network service provider for a new SIM card.

3.3 PIN2PIN2 PIN2 is Personal Identification Number 2, used to access specific function of your SIM card, for example PIN2 code is used to set a Maximum Cost, Price & Unit or a FDN.

PIN2 code is composed of at least 4 to 8 digits, is only available when your SIM card supports such functions.

If the PIN2 code is entered incorrectly three times in succession, PIN2 will be blocked and the Enter PUK2 screen will be prompted.

Therefore those functions cannot be used until the unblock code (PUK2) is entered.

Security Codes 19 3.4 PUK2PUK2 PUK2 is Personal Unblocking Key 2, used to unblock the blocked PIN2 due to incorrectly entered PIN2.

PUK2 code is composed of 8 digits and it is only used when those functions mentioned above are available.

If the PUK2 code is entered incorrectly ten times in succession, the PUK2 will be blocked.

Therefore those functions can not be used until the unblock code(PUK2) is entered.

3.5 SIM Lock CodeSIM Lock Code SIM Lock Code is used to safeguard your phone being used by another SIM card.

The code is a security code entered when you enable the SIM Lock menu.SIM Lock menu.SIM Lock 3.6 Lock CodeLock Code Lock Code is used to prevent your phone from being used by another person.

The code is provided with your phone and is preset from factory to default setting of ‘0 0 0 0’ 3.7 PasswordPassword Password is used to access call barring service and the code is the network password of four digits code.

In order to get the Password, you should subscribe call barring service on your network service provider and then request for the Password.

Making and Receiving a Call 20 4.1 Making a callMaking a call 1.

To make a call on your phone, enter the area code and the phone number in the idle screen.

In case you enter a number incorrectly, press the [Clear soft key] once to delete the last digit that you have entered.

To remove all the digits, press and hold the [Clear soft key] down until they are deleted, or press [ ].

If the number is identified from the phonebook, the name is displayed.

You can hear the Connect Tone when the call is answered from the called person, if you set it On.

If you want to end the call whilst making a call, press [End soft key] or [ ], or close the folder.

The screen will display a brief message and return to the idle.

The brief message at the call ending may remain long time if the network is busy.

If the earphone is inserted, or if the call is data call, the folder closing does not make the call end.

Search the group with [ ] or [ ] to find the group of person you want the call to belong to.

Locate the cursor with [ ] or [ ] to the name or number you want to call.

Quick dialling from Speed List Press and hold a numeric key ([0], [2] ~[20]) that represents the entry number in the Speed List.

Then the number assigned on the key will be automatically dialled.