Innostream INNO 90

Voici un extrait du manuel du Innostream INNO 90 que vous pouvez télécharger gratuitement :

Made in Korea INNO 90 User s Manual innostre a m GPRS Tri-Band Camera Phone Series INNO 90(„ ` ˙ )-‡»` … `⁄ 2004.2.6 3:10 PM ˘ ` 1 SaehanP&D Co.,Ltd HyperLaser G3Plus 1200DPI 175LPI INNO 90 User s Manual Unpacking 4 Unpacking your package contains the following items.

INDEX 121 INNO 90(„ ` ˙ )-‡»` … `⁄ 2004.2.6 3:10 PM ˘ ` 7 SaehanP&D Co.,Ltd HyperLaser G3Plus 1200DPI 175LPI INNO 90 User s Manual 1.

Before You Start The following illustration shows the main elements of your phone.

1.1 Phone Layout and Icons Main Display Screen Soft Key(left) Soft Key(Right) Side KeyNavigation Keys END KeySEND Key Numbers and Alpha keys Micro Phone Camera Ear Phone Jack External Socket Sub Display Screen Elastomer Antenna Shows the received signal strength.

The larger the number of bars, the better the signal strength.

Appears when a new text message has been received Appears when you have messages waiting in voice mail Appears when vibrator is selected as ring tone type.

Appears when the phone is out of your home network area and the phone is registered to the network other than its home service (i.e.

when travelling in other countries with GSM service) Shows the level of battery status.

If your phone is in the quick silence mode, all audible key tones are muted and all audible alerts are changed to vibrator alert.

Appears when a PUSH message has been received Appears when your phone is registered to a GPRS network.

INNO 90(„ ` ˙ )-‡»` … `⁄ 2004.2.6 3:10 PM ˘ ` 9 SaehanP&D Co.,Ltd HyperLaser G3Plus 1200DPI 175LPI INNO 90 User s Manual 1.

Before You Start 1.2 Keys Description Appears when an alarm is expired.

Indicates that your phone is under security code checking after power up.

Appears when a new text message has been received Appears when a new MMS message has been received Appears when you have messages waiting in voice mail Appears when a new PUSH message has been received Indicates that the battery level of your phone is low.

1 1 1 1 Performs the functions indicated by the text in the bottom line of the display screen above those keys.

In the idle mode, launches the recent calls list.(Dialed, Missed and Received) In the menu, selects menu function or stores information that you have entered (such as a name) in the phone or SIM memory.

Enters + (International Indicator) or P (Pause) when pressed and heldWhile you are playing the game, these keys are used for adjusting the game melody volume.

(on the left side of phone) During a call, adjust the earpiece volume.

[VOL-UP] It switches between the quick silence mode and previous profile you have set on Profiles menu when pressed and held in the idle mode.

[VOL-DOWN] In the idle mode, displays the today’s date, day and time for short time.

In the idle mode, launches the Still Shot menu of Camera menu if you press and hold while the folder is closed.

1 INNO 90(„ ` ˙ )-‡»` … `⁄ 2004.2.6 3:10 PM ˘ ` 11 SaehanP&D Co.,Ltd HyperLaser G3Plus 1200DPI 175LPI INNO 90 User s Manual 1.

[NAVI-LEFT] : Push the left side of the navigation key bar to left direction.

[NAVI-RIGHT] : Push the right side of the navigation key bar to right direction.

[NAVI-UP] : Push the up side of the navigation key bar to up direction.

[NAVI-DOWN] : Push the down side of the navigation key bar to down direction.

1.4 Using the Navigation Keys You can switch the sound/alert mode of your phone by just pressing and holding the [VOLUME-UP]on the idle screen.

icon on the top of the main display screen or icon on the top of the sub display screen indicates that your phone is under the quick silence mode status.

If your phone is in the quick silence mode, all audible key tones are muted and all audible alerts are changed to vibrator alert.

You can return to previous profile setting by pressing and holding the [VOLUME-UP] again.

1.3 Quick Silence Mode [NAVI-CENTRE] In the editing mode, launches the editing mode selection menu.

[NAVI-LEFT] : launches the Still Shot menu of Camera menu [NAVI-RIGHT] : launches the Games menu.

During a call, and change the call focus on the multiple calls state.

[NAVI-UP] : launches the My Menu list, and launch the My Menu Setting menu if you press and hold key.

For more details, please see My Menu Setting menu in section 9.

[NAVI-DOWN] : launches the Inbox message lists of all kinds of message.

Key Description INNO 90(„ ` ˙ )-‡»` … `⁄ 2004.2.6 3:10 PM ˘ ` 13 SaehanP&D Co.,Ltd HyperLaser G3Plus 1200DPI 175LPI INNO 90 User s Manual 1.

Before You Start The background image is displayed according to the setting of Wallpaper menu.

You can set the background image from the Sample Image, Photo Album, Image File, MFlash or Video.

Icon Area: 9 icons such as Signal Level, GPRS, SMS, Vibrator, Alarm, Roaming, Battery Level, PUSH and Voicemail are displayed indicating the phone status.

If the quick silence mode is enabled, icon will appear in the Vibrator icon’s place.

If there is an active GPRS connection, icon will appear in the GPRS icon’s place.

If Traver Charger is inserted, the Battery icon will be scrolled.

Network Status or Event Area: Network name registered is displayed.

If Network Name Display menu is set to Off, the network name is not displayed even though your phone is registered to any GSM or GPRS network.

If there is not any GSM or GPRS network near the location you are, No Service is displayed.

If you are in the coverage of a GSM or GPRS network but you are not allowed to be registered to the network, Emergency Only is displayed.

If an event is occurred, an adequate big event icon is displayed.

Broadcast and Digital Time Area: If you set to get the broadcast message from the network, you can see it on this area of the idle screen.

For details of how to activate and deactivate it, please see Broadcast menu in Section 9.

In this case, the User Selectable Area updates the received broadcast messages.

Note : If you insert the earphone to the jack on the left side of your phone, you can use it in the same way as your phone°’s earpiece and microphone.

You can answer or end a call by pressing the hook button on the earphone.

When new waiting call is come while you are in a call, you can answer the waiting call by pressing the hook button on the earphone.

(The first call will be held automatically) You can make the last number dialed call in the idle screen by pressing the hook button on the earphone.

The last number dialed is launched by pressing the hook button, and then the call will be made by pressing the hook button again.

1.5 Using the Earphone INNO 90(„ ` ˙ )-‡»` … `⁄ 2004.2.6 3:10 PM ˘ ` 15 SaehanP&D Co.,Ltd HyperLaser G3Plus 1200DPI 175LPI 2.

Align the bottom of the battery down into the holes in the bottom of the phone.

Then sit the battery on the back of the aligned until it clicks into place.

Slightly lift the upper place of battery out of back of phone.

2.2 How to remove the battery Please never detach the battery from your mobile while your phone is alive.

To turn off your phone, please press and hold down only until you see the power-off animation.

Note : The background image is displayed according to the setting of Wallpaper menu.

You can set the background image from the Sample Image, Photo Album, Image File, Mflash or Video.

Icon Area: 5 soft icons such as Signal Level, GPRS, Vibrator, Alarm, and Battery Level are displayed indicating the phone status.

If the quick silence mode is enabled, icon will appear in the Vibrator icon’s place.

If there is an active GPRS connection, icon will appear in the GPRS icon’s place.

If Traver Charger is inserted, the Battery icon will be scrolled.

Network Status or Event Area: Network name registered is displayed.

If Network Name Display menu is set to Off, the network name is not displayed even though your phone is registered to any GSM or GPRS network.

If there is not any GSM or GPRS network near the location you are, No Service is displayed.

If you are in the coverage of a GSM or GPRS network but you are not allowed to be registered to the network, Emergency Only is displayed.

If an event is occurred, an adequate event image is displayed.

If you press [VOLUME-DOWN] on the idle screen, current date and day is displayed on the area for short time.

If Clock Display menu is set to Off, the digital time is not displayed.

Function Key Area: The functions assigned to right soft key and left soft key are displayed.

If you press [VOLUME-DOWN], current date, day and time is displayed at this area for short time.

The broadcast message service may not be available on all networks.Note : INNO 90(„ ` ˙ )-‡»` … `⁄ 2004.2.6 3:10 PM ˘ ` 17 SaehanP&D Co.,Ltd HyperLaser G3Plus 1200DPI 175LPI INNO 90 User s Manual 2.

Getting Started Ensure your phone is switched off and the charger is detached first before you start the following steps.

2.4 How to place the SIM card The first charging must be for at least 4 hours in order to achieve optimum performance when you buy this phone.

Normally your phone completes to charge the battery in one and half hour.

Your phone turns off by itself if the battery is not able to supply enough power.

The display may not visible for a few seconds in case that full discharged battery is used.

Plug your Travel Adaptor into the external socket at the bottom of your phone.

The percentage of charging will be indicated on the Sub-LCD screen.

After complete charging, the percentage of charging disappears.

Plug your Travel Adaptor into the charger socket at the bottom of the Battery Charger.

Sit your battery into the holder of the Battery Charger properly sliding down.

The LED indicator of the Battery Charger indicate the charging status as follow.

- Green Color : It indicates idle state or full-charged state.

2.3 How to charge the battery Even after complete charging, the phone automatically checks the battery status during the Travel Adaptor is inserted.

Once it detects that the battery level is below full status, it will automatically recharge the battery.

Note : INNO 90(„ ` ˙ )-‡»` … `⁄ 2004.2.6 3:10 PM ˘ ` 19 SaehanP&D Co.,Ltd HyperLaser G3Plus 1200DPI 175LPI INNO 90 User s Manual 21 2.

a) To switch your phone on, press and hold down until you hear the power-on melody.

If Enter PIN is prompted, enter your PIN and then press [Ok soft key].

If Enter PIN is prompted, enter your PIN and then press [Ok soft key].

If Enter Lock Code is prompted, enter your Lock Code and then press [Ok soft key].

After the phone is turned on, the phone searches for a network.

b) To switch your phone off, press and hold down until you see the power-off animation.

Getting Started 22 Ensure your phone is switched off and the charger is detached first before you start the following steps.

Slide the SIM card by pushing up the back of the card and remove it from the holder.

2.5 How to remove the SIM card About the SIM card The SIM card is a computer chip containing information about your subscription, security, phonebook etc.

When you register as a subscriber with GSM or GPRS network operator, you are provided with the SIM card.

Always handle the SIM card with care and insert with the gold contacts face down.

Note : If your PIN is entered invalidly three times in succession, your SIM card is blocked.

In order to unblock it, see Security Codes in section 3 Note : INNO 90(„ ` ˙ )-‡»` … `⁄ 2004.2.6 3:10 PM ˘ ` 21 SaehanP&D Co.,Ltd HyperLaser G3Plus 1200DPI 175LPI INNO 90 User s Manual 3.

Security Codes PUK2 is Personal Unblocking Key 2, used to unblock the blocked PIN2 due to incorrectly entered PIN2.

PUK2 code is composed of 8 digits and it is only used when those functions mentioned above are available.

If the PUK2 code is entered incorrectly ten times in succession, the PUK2 will be blocked.

Therefore those functions can not be used until the unblock code(PUK2) is entered.

3.4 PUK2 SIM Lock Code is used to safeguard your phone being used by another SIM card.

The code is a security code entered when you enable the SIM Lock menu.

3.5 SSIIMM LLoocckk Code The security codes are used to protect your phone and SIM card from other person’s use and control access to security and other options within the menus.

You can change the security codes (except SIM Lock Code, PUK Code, PUK2 Code).

For more details, please see the Security Setting menu in section 9.

PIN is Personal Identification Number, used to safeguard your SIM card.

PIN code is composed of at least 4 to 8 digits, and usually provided with your SIM card.

If the PIN code is entered incorrectly more than three times in succession, PIN will be blocked and your SIM card will automatically lock-up and the Enter PUK screen will be prompted.

Once you SIM card is blocked, you must enter the unblock code (PUK) to use your phone again.

3.1 PIN PUK is Personal Unblocking Key, used to unblock the blocked SIM card due to incorrectly entered PIN.

PUK code is composed of 8 digits, and usually provided with your SIM card.

If the PUK code is entered incorrectly ten times in succession, PUK will be blocked and your SIM card will be automatically lock-up and the SIM Blocked message will be displayed.

Once you see the message then you need to contact your network service provider for a new SIM card.

3.2 PUK PIN2 is Personal Identification Number 2, used to access specific function of your SIM card, for example PIN2 code is used to set a Maximum Cost, Price & Unit or a FDN.

PIN2 code is composed of at least 4 to 8 digits, is only available when your SIM card supports such functions.

If the PIN2 code is entered incorrectly three times in succession, PIN2 will be blocked and the Enter PUK2 screen will be prompted.

Therefore those functions cannot be used until the unblock code (PUK2) is entered.

3.3 PIN2 Lock Code is used to prevent your phone from being used by another person.

The code is provided with your phone and is preset from factory to default setting of '0 0 0 0' 3.6 LLoocckk CCooddee Password is used to access call barring service and the code is the network password of four digits code.

In order to get the Password, you should subscribe call barring service on your network service provider and then request for the Password.

3.7 PP aa ss ss ww oo rr dd INNO 90(„ ` ˙ )-‡»` … `⁄ 2004.2.6 3:10 PM ˘ ` 23 SaehanP&D Co.,Ltd HyperLaser G3Plus 1200DPI 175LPI INNO 90 User s Manual 4.

When there is an incoming call, the phone icon on the sub display screen will be displayed, and the melody will sound or the vibrator will work according to the setting.

If the caller is identified, the caller photograph and caller phone number/name (if stored in the Phonebook) are displayed and small group icon on the screen is displayed.

If the caller is not identified by network, No Number or Withheld (if the network suppresses the number display) is displayed.

Press [Answer soft key] or or open the folder to answer the incoming call.

If Any Key Answer menu option is set to On and the folder has been opened, you can press any key to answer the call except for the [End soft key] or 3.