Sharp GX1

Voici un extrait de la notice du Sharp GX1 que vous pouvez télécharger gratuitement :

3

Press or to select “Yes”, then press

Voice Memo (M 5-4) This allows you to record a voice message of up to 10 seconds, which can be used to remind you of schedule entries or be sent within an MMS

The recorded voice memo is registered in the Sound Gallery

Recording a Voice Memo 1

Press to display the Main Menu

2

Press or to select “Organiser”, then press

3

Press or to select “Voice Memo”, then press

4

Press to start recording

To stop recording before the recording time is over, press [Stop]

69 Organiser 5

Select “Save” to save the voice memo, then press

If you wish to exit the voice memo, press [Exit]

6

Press or to select “Yes”, then press

To cancel exiting, select “No” in step 6, then press

Tip • You can also record a voice memo by pressing and instead of steps 1 to 3

• If you wish to record a voice memo again, select “Record Again” in step 5

The screen will return to step 4

To Play Back the Saved Voice Memo 1

Perform steps 1 to 4 in “Recording a Voice Memo” on page 68

2

Press or to select “Playback”, then press

3

Press

The recorded voice memo is played back

To stop playback, press [Stop]

Help List (M 5-5) You can view the help list and use it to guide you in the phone’s functions

1

Press to display the Main Menu

2

Press or to select “Organiser”, then press

3

Press or to select “Help List”, then press

The help list is displayed

4

Check the key operation by pressing and

5

When you have finished, press [Back]

Call Manager 70 Call Manager Call Register The phone will record the last 10 missed calls, received calls and dialled numbers

Viewing Call Register 1

Press to display the Main Menu

2

Press or to select “Call Manager”, then press

3

Press or to select “Call Register”, then press

4

Press or to select “Missed Calls”, “Received Calls” or “Dialled Numbers”, then press

The selected call register list is displayed

5

Select the number you wish to view by pressing or

6

Press [View]

Call record “1” is the most recent

When you press , call record “2” will be displayed

If you wish to dial the number, press

7

When you have finished, press [Back] to return to step 4

Tip • You can also confirm call records by pressing in stand-by mode

• You can switch between histories by pressing or in step 5 only when you enter by in stand-by mode

Sending Messages 1

Perform steps 1 to 5 in “Viewing Call Register”

2

Select the file name you wish to send by pressing or , then press

3

Press or to select “Send Message”, then press

4

Press or to select “MMS” or “SMS”, then press

5

Enter your message

For details on creating a message, see “Creating a New MMS” on page 98 or “Creating a New SMS” on page 106

Deleting Call Register Deleting Single Call Record 1

Perform steps 1 to 5 in “Viewing Call Register”

2

Press

3

Press or to select “Delete”, then press

71 Call Manager 4

Press or to select “Yes”, then press

The selected call record will be deleted

To cancel deletion, select “No” in step 4, then press

To Delete All Call Register (M 6-2-4) 1

Perform steps 1 to 3 in “Viewing Call Register” on page 70

2

Press or to select “Clear Logs”, then press

3

Select “All Calls”, then press

4

Press or to select “Yes”, then press

All call register records will be deleted

To cancel deleting, select “No” in step 4, then press

Tip • If you select “Missed Calls”, “Received Calls” or “Dialled Numbers” in step 3, the call register in the selected category will be deleted

Call Timers (M 6-2-5) This function lets you check the duration of your calls

Checking the Duration of the Last Call 1

Press to display the Main Menu

2

Press or to select “Call Manager”, then press

3

Press or to select “Call Register”, then press

4

Press or to select “Call Timers”, then press

5

Select “Last Call”, then press

The duration of the last call is now displayed

6

When you have finished, press [Back] to return to call timers menu

Checking the Total Call Time 1

Press or to select “All Calls”, then press in step 5 in “Checking the Duration of the Last Call”

2

When you have finished, press [Back]

Call Manager 72 Call Costs (M 6-2-6) This function lets you check the charges for your calls

Charging Advice is not supported on all networks

Please check with your service provider for availability

Checking the Cost of the Last Call 1

Press to display the Main Menu

2

Press or to select “Call Manager”, then press

3

Press or to select “Call Register”, then press

4

Press or to select “Call Costs”, then press

5

Select “Last Call”, then press

The cost of the last call is now displayed

6

When you have finished, press [Back] to return to call timers menu

Checking the Total Call Cost 1

Press or to select “All Calls”, then press in step 5 in “Checking the Cost of the Last Call”

2

When you have finished, press [Back]

Setting the Charge Rate Set the charge rate to calculate the call cost and set the maximum limit for call cost

1

Perform steps 1 to 4 in “Checking the Cost of the Last Call”

2

Press or to select “Cost Units”, then press

3

Press or to select “Set Units”, then press

4

Enter your PIN2 code, then press

5

Enter a cost per unit, then press

To enter a decimal point, press

6

Enter a currency unit (up to 3 characters), then press

Checking the Charge Rate 1

Select “Read Units”, then press at step 3 in “Setting the Charge Rate”

The charge rate is now displayed

2

When you have finished, press [Back]

73 Call Manager Setting the Charge Limit This function is useful if you wish to make sure you do not exceed a certain charge limit

1

Perform steps 1 to 4 in “Checking the Cost of the Last Call” on page 72

2

Press or to select “Max Cost”, then press

3

Press or to select “Set Limit”, then press

4

Enter your PIN2 code, then press

5

Enter a value, then press

To enter a decimal point, press

Checking the Charge Limit 1

Select “Read Limit”, then press at step 3 in “Setting the Charge Limit”

The value of the charge limit is now displayed

2

When you have finished, press [Back]

Resetting All Call Timers and Call Costs 1

Press to display the Main Menu

2

Press or to select “Call Manager”, then press

3

Press or to select “Call Register”, then press

4

Press or to select “Call Timers” or “Call Costs”, then press

5

Press or to select “Clear Timers” or “Clear Costs”, then press

6

Press or to select “Yes”, then press

To cancel resetting, select “No”, then press

7

Enter your PIN2 code, then press

The Call Timers and Costs are reset to zero

Checking the Residual Credit 1

Perform steps 1 to 4 in “Checking the Cost of the Last Call” on page 72

2

Press or to select “Residual Credit”, then press

3

When you have finished, press [Back]

Call Manager 74 Data Counter (M 6-2-7) You can confirm the amount of bytes which you used in the GPRS transmission

1

Press to display the Main Menu

2

Press or to select “Call Manager”, then press

3

Press or to select “Call Register”, then press

4

Press or to select “Data Counter”, then press

5

Press or to select “Last Data” or “All Data”, then press

You can now check the amount of bytes

6

When you have finished, press [Back]

Resetting All Data Counter 1

Perform steps 1 to 4 in “Data Counter”

2

Press or to select “Clear Counter”, then press

3

Press or to select “Yes”, then press

The Data Counter is reset to zero

To cancel resetting, select “No” at step 3, then press

Diverts (M 6-3) This service is used to divert incoming calls to your voice mail system or to another number depending on certain conditions in which you cannot answer a call

Divert Calls 1

Press to display the Main Menu

2

Press or to select “Call Manager”, then press

3

Press or to select “Diverts”, then press

4

Select one of the divert options by pressing or , then press

The divert options available are: • “All Calls”: Diverts all voice calls without ringing

• “When Busy”: Diverts incoming calls when you are on a call

• “No Answer”: Diverts incoming calls if you do not answer a call within a certain period of time

• “Not Reachable”: Diverts incoming calls when your phone is out of network service or switched off

5

Select “On”, then press

75 Call Manager 6

If you wish to divert calls to a number which is located in the Phonebook, search for the desired Phonebook entry

Press or [Search] to search the number by name or press or to search in alphabetical order, then press

For details on searching the Phonebook entries, see “Finding a Name and Number” on page 27

7

If you wish to divert calls to a number which you can enter manually, enter the phone number

8

Press

If you select “No Answer” in step 4: 9

Enter the period of time using the digit keys (05 to 30 seconds), then press

Note • When a divert is set to “All Calls”, “ ” appears on the stand-by screen

Tip • If you select “By Service” in step 5, you can select the divert option further in the selected option in step 4

Checking the Divert Status 1

Perform steps 1 to 3 in “Divert Calls” on page 74

2

Select the divert option you wish to check by pressing or , then press

3

Press or to select “Status”, then press

You can now check the status of the selected divert option

4

When you have finished, press [Back]

Cancelling All Divert Settings 1

Perform steps 1 to 3 in “Divert Calls” on page 74

2

Press or to select “Cancel All”, then press

3

Press or to select “Yes”, then press

To cancel the resetting, select “No” in step 3, then press

4

Press [OK]

All divert settings are cancelled

To cancel the Divert Settings Individually 1

Perform steps 1 to 3 in “Divert Calls” on page 74

2

Select the divert option you wish to cancel by pressing or , then press

3

Press or to select “Off”, then press

4

Press [OK]

The selected divert has been cancelled

Settings 76 Settings Phone Settings Changing the Language (M 7-1-1) You can change the display language that the phone uses for the display messages and text entry

1

Press to display the Main Menu

2

Press or to select “Settings”, then press

3

Select “Phone Settings”, then press

4

Select “Language”, then press

5

Press or to select the desired language, then press

Wallpaper for the Stand-by Screen (M 7-1-2) For the stand-by screen, an animation and 3 illustrations are provided

Images taken with the digital camera or downloaded from a WAP site can be used for Wallpapers

To Set Built-in Animations or Illustrations 1

Perform steps 1 to 3 in “Changing the Language”

2

Press or to select “Wallpaper”, then press

3

Press or to select “On”, then press

4

Select “Animation” or “Illustration 1” to “Illustration 3” by pressing or , then press

5

Press again to set

The selected animation or illustration is displayed on the stand-by screen

Note • Even if an animation is selected, the stand-by screen displays a static image when you do not operate the phone for about 30 seconds (It is different according to the selected data)

Tip • To cancel the Wallpaper setting, select “Off” in step 5

To Set an Original Image for the Stand-by Screen 1

Perform steps 1 to 3 in “To Set Built-in Animations or Illustrations”

2

Press or to select “Original”, then press

The file names of the images that are registered in the Image Gallery is displayed

3

Select the image by pressing or , then press

The selected image is displayed

77 Settings 4

To determine what part of the image is chosen to be displayed, select it by pressing , , or , then press

The selected image is displayed on the stand-by screen

Note • Some images cannot be used because of their image and data types

Backlight (M 7-1-3) You can turn the backlight of the main screen display on or off when you press the keypad or the optional cigarette lighter charger is connected to the phone

You can change or specify the amount of time the backlight is ON for, which will help conserve battery life

To Turn On/Off the Backlight 1

Perform steps 1 to 3 in “Changing the Language” on page 76

2

Press or to select “Backlight”, then press

3

Press or to select “On/Off”, then press

4

Select “On” to set backlight on or “Off” to set backlight off by pressing or , then press

When you select “On” in step 4: 5

Enter the duration of the backlight using 2 digits, then press

To Turn On/Off the Backlight whilst Charging with the Cigarette Lighter Charger 1

Perform steps 1 and 2 in “To Turn On/Off the Backlight”

2

Press or to select “In Car”, then press

3

Select “On” to set backlight on or “Off” to set backlight off by pressing or , then press

Adjusting the LCD Screen (M 7-1-4) You may sometimes need to adjust the LCD contrast to suit certain lighting conditions

1

Perform steps 1 to 3 in “Changing the language” on page 76

2

Press or to select “LCD Contrast”, then press

3

Press (Dark) or (Light) to adjust the contrast for maximum clarity

LCD contrast can be adjusted in 9 levels

4

Press

Settings 78 Colour Reduction (M 7-1-5) The colour of the screen of this phone is automatically reduced for preventing battery draining if it is not operated

You can change the time the Colour Reduction will go into effect works between 2 and 20 minutes, or disable this function

Tip • When you purchase this phone, the colour reduction is set to work 2 minutes later

1

Perform steps 1 to 3 in “Changing the language” on page 76

2

Press or to select “Colour Reduction”, then press

3

Select “On” to set the colour reduction function on or “Off” to set it off by pressing or , then press

When you select “On” in step 3: 4

Enter the time until the colour reduction works in two digits (02 to 20 minutes) using the digit keys, then press

Note • The colour reduction does not work whilst you are calling or using WAP service

Setting the Greeting Message (M 7-1-6) You can set the message which will appear when the phone is turned on

1

Perform steps 1 to 3 in “Changing the Language” on page 76

2

Press or to select “Greeting Message”, then press

3

Press or to select “On”, then press

4

Enter the message, then press

Up to 16 characters can be stored as a message

For details on entering characters, see “Entering Characters” on page 23

Tip • To cancel the Greeting Message setting, select “Off” in step 3

Assign Images (M 7-1-7) Images can be displayed when turning the power on or off, when receiving an incoming call, or when operating the alarm

Images taken by a digital camera or downloaded from a WAP site can be used

79 Settings To Set Built-in Images 1

Perform steps 1 to 3 in “Changing the Language” on page 76

2

Press or to select “Assign Images”, then press

3

Select the screen to set the image by pressing or , then press

4

Select “Animation 1” or “Animation 2” by pressing or , then press

or Select “Illustration 1” or “Illustration 2” by pressing or , then press when you select “Alarm” in step 3

The selected image is displayed

5

Press

Tip • To cancel the image setting, select “Off” in step 4

To Set an Original Image 1

Perform steps 1 to 3 in “To Set Built-in Images”

2

Press or to select “Original”, then press

The file name of the image that is registered in the Image Gallery is displayed

3

Select the image by pressing or , then press

The selected image is displayed

4

To determine what part of the picture is chosen to be displayed, select it by pressing , , or , then press

Note • Some images cannot be used because of their image and data types

Phone Setting Reset (M 7-1-8) The phone settings can be reset to their default settings

1

Perform steps 1 to 3 in “Changing the Language” on page 76

2

Press or to select “Set to Default”, then press

3

Enter your handset code, then press

4

Press or to select “Yes”, then press

To cancel resetting, select “No” in step 4, then press

All phone settings are reset

Note • If you enter a wrong handset code in step 3, operation is cancelled

Settings 80 Call Settings Set various types of functions and services

...